A simultaneous fill and gross weighing machine, the FK-6 valve bag filler is versatile, economical and easy to operate in a proven dependable design.
More Pictures:
Features:
Heavy-duty construction for long life with low maintenance
Compact size and low overall height permits installation under blenders and in low headroom installations
Versatile hopper design and an assortment of filling screw options will handle a wide range of products
Agitator assembly in product hopper to prevent bridging and will maintain continuous feed to auger screw
Flexure mounted weighing mechanism for consistent support through scale travel
Fills valve bags as well as open top bags, drums, and pails
Reverse cycle at end of bag fill to stop product flow enabling more accurate weights and cleaner filling
Operation
This bagger is gravity fed from your product supply bin or blender. Product entering the bagger passes through the agitator section and into the auger which conveys the product into the bag, drum, or pail. When product reaches the preset weight, the bagger will automatically stop the flow of product.
Specifications
Height: 51-¼ " Base to product inlet
Width: 28"
Depth: 62"
Weight: Approximately 850 lbs.
Motor: 3HP or 5HP, 230/460
Scale and Weighing Mechanism
The weighing portion of the bagger, which includes the fill spout and bag support, is supported by flexure plates. The standard mechanical scale is a rugged, single-beam design using two inverted pivots. The bag weight is adjusted by turning the counterweight support screw located at the front of the bagger. A sliding counterweight type fine weight adjustment is within easy reach of the operator.
Motor and Controls
The bagger uses a heavy duty 3 HP TEFC drive motor (5 HP optional). The motor controls are mounted in a NEMA 12 enclosure at the rear of the bagger. The controls include a transformer for 120v/1ph. power to the operator controls. All wiring and components are NEMA 12 rated.
Options
Automatic start
Pneumatic bag clamp
Automatic bag discharge
Drum & pail filling attachments
Hard facing on filling screw for use with abrasive products
Stainless steel facings
Distinctive finishes
We Also Service
We also service many other pheumatic & auger valve bagging systems including, but not limited to the following manufacturers/models:
Black Diamond / Bemis
St. Regis / Stone Container
MHE / Chantland
HL Stoker
Taylor Products
Robey Packaging
Vic System
Ecc
Please contact us to discuss your application in detail.
